Felker Tile Saw for rent in Alexandria, Minnesota
Felker Tile Saw rents in Alexandria, Minnesota for $15 per hour, $60 per day or $240 per week. Pickup is in Alexandria, MN 56308. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $15 per hour
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Alexandria, MN
About this rental
Tile Saw, 17322 by Felker is a reliable tool for cutting tiles with ease. It includes a 10in brick blade that delivers sharp and accurate cuts for both professional and DIY projects. Min 2 hr rental-includes 10in brick blade (yellow).
How much does it cost to rent a tile saw in Alexandria, MN?
Felker Tile Saw rents for $15 per hour, $60 per day or $240 per week. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 4 days.
| Rental period | Price | Works out to |
|---|---|---|
| Hourly | $15 | |
| Daily | $60 | |
| Weekly | $240 | About $34 per day |
For comparison: Tile saw rentals typically cost $42 to $80 per day or $126 to $210 per week, depending on blade size and power. Renting lets you avoid the $200+ purchase price if you only need it for one project.
Read the full guide: Tile Saw Rental Cost: Daily & Weekly Rates
What is a tile saw good for?
A wet tile saw makes clean, straight cuts in tile and stone.
- Straight cuts in ceramic and porcelain tile
- Cutting stone and pavers
- Notches and angled cuts
- Cutting concrete slabs: a concrete saw
- Breaking out an old tile floor: a jackhammer, $24 per hour
Use a manual tile cutter for simple straight cuts on ceramic, or rent a wet tile saw for porcelain, stone, curves, and notches that need precision edges.
Read the full guide: Tile Saw vs Tile Cutter: Which One Do You Need?
What are typical specs for rental wet tile saws?
This listing doesn't state a size, so these are the usual figures across the wet tile saws rental stores stock, not this unit's own: each is the range across 8 published sources.
| Blade diameter | 7 to 10 in |
| Rip capacity | 14 to 28.4 in |
| Depth of cut | 1.13 to 3.07 in |
| Motor power | 0.75 to 1.75 hp |
Based on: MK Diamond MK-370EXP, MK Diamond MK-660, RIDGID R4031 9 Amp 7 in. Jobsite Wet Tile Saw with Stand, QEP 7" Power Pro 1HP Wet Tile Saw, DEWALT D24000S, MK Diamond MK-101-24, Husqvarna TS 60, Husqvarna TS 70
What size tile saw do I actually need for my project?
Choose a 7-inch saw for small ceramic tiles in bathrooms and kitchens, or a 10-inch wet saw if you're cutting larger porcelain tiles over 18 inches. Matching your saw size to your tile dimensions prevents cracked material and wasted time on your project.
Read the full guide: What Size Tile Saw Do I Need? Sizing Guide & Rental Tips
Where do I pick it up?
Pickup is in Alexandria, Minnesota 56308, Monday to Friday 7:00 am to 5:15 pm and Saturday 7:00 am to 12:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a tile saw?
Wet tile saws require constant attention to spinning blades, water flow, and electrical power; wear proper PPE, secure electrical connections, keep hands clear of the blade, and manage water carefully to prevent injuries.
Read the full guide: Tile Saw Safety Tips: How to Use a Wet Tile Saw Safely
A tile saw cuts ceramic, porcelain, and stone tiles with a diamond blade and water cooling system. Setup involves securing the tile, adjusting the blade height, and making slow, steady cuts while wearing safety gear and keeping hands clear of the blade.
Read the full guide: How to Use a Tile Saw: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed.
Reserve Now
