Skip to content

ASPHALT & VINYL TILE CUTTER UP TO 12 SQ for rent in Johnson City, Tennessee

1 unit availableListed by a local owner in Johnson City, TN

ASPHALT & VINYL TILE CUTTER UP TO 12 SQ is a tile saw that rents in Johnson City, Tennessee for $8 per day, $24 per week or $60 per month. Pickup is in Johnson City, TN 37601. Reserve and pay online through RNTR.

New to RNTR?

RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

How renting on RNTR works1:30
  1. Step 1Pick your datesFrom $8 per day
  2. Step 2Lister approves your requestThe owner confirms your dates
  3. Step 3Pay securelyCard checkout, secured by Stripe
  4. Step 4Pick it upFrom the owner in Johnson City, TN
No photo available
$8/per day
Daily$8
Weekly$24
Monthly$60
Reserve Now
  • Secure payment through Stripe, at checkout on RNTR
  • Questions? Call (877) 399-RNTR
At a glance
Type
Tile saw
Location
Johnson City, TN 37601
Available
1 unit
Service
Pickup
Typical rental range
Blade diameter
7 to 10 in
Rip capacity
14 to 28.4 in
Depth of cut
1.13 to 3.07 in
Pickup
Johnson City, TN 37601
Monday to Friday7:30 am to 5:00 pmSaturday7:30 am to 12:00 pmSundayClosed
See more rentals

About this rental

Manual cutter capable of precise cuts on asphalt and vinyl tiles up to 12 square.

How much does it cost to rent a tile saw in Johnson City, TN?

ASPHALT & VINYL TILE CUTTER UP TO 12 SQ rents for $8 per day, $24 per week or $60 per month. A week costs about the same as 3 single days, so the weekly rate is the better price for any rental longer than 3 days. On top of the rate, the lister charges a 10% damage waiver at checkout.

Rental periodPriceWorks out to
Daily$8
Weekly$24About $3.43 per day
Monthly$60About $2 per day

For comparison: Tile saw rentals typically cost $42 to $80 per day or $126 to $210 per week, depending on blade size and power. Renting lets you avoid the $200+ purchase price if you only need it for one project.
Read the full guide: Tile Saw Rental Cost: Daily & Weekly Rates

What is a tile saw good for?

A wet tile saw makes clean, straight cuts in tile and stone.

Use it for
  • Straight cuts in ceramic and porcelain tile
  • Cutting stone and pavers
  • Notches and angled cuts
Rent something else for
  • Cutting concrete slabs: a concrete saw
  • Breaking out an old tile floor: a jackhammer

Use a manual tile cutter for simple straight cuts on ceramic, or rent a wet tile saw for porcelain, stone, curves, and notches that need precision edges.
Read the full guide: Tile Saw vs Tile Cutter: Which One Do You Need?

What are typical specs for rental wet tile saws?

This listing doesn't state a size, so these are the usual figures across the wet tile saws rental stores stock, not this unit's own: each is the range across 8 published sources.

Blade diameter7 to 10 in
Rip capacity14 to 28.4 in
Depth of cut1.13 to 3.07 in
Motor power0.75 to 1.75 hp

Based on: MK Diamond MK-370EXP, MK Diamond MK-660, RIDGID R4031 9 Amp 7 in. Jobsite Wet Tile Saw with Stand, QEP 7" Power Pro 1HP Wet Tile Saw, DEWALT D24000S, MK Diamond MK-101-24, Husqvarna TS 60, Husqvarna TS 70

What size tile saw do I actually need for my project?

Choose a 7-inch saw for small ceramic tiles in bathrooms and kitchens, or a 10-inch wet saw if you're cutting larger porcelain tiles over 18 inches. Matching your saw size to your tile dimensions prevents cracked material and wasted time on your project.
Read the full guide: What Size Tile Saw Do I Need? Sizing Guide & Rental Tips

Where do I pick it up?

Pickup is in Johnson City, Tennessee 37601, Monday to Friday 7:30 am to 5:00 pm and Saturday 7:30 am to 12:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.

What should I know before using a tile saw?

Wet tile saws require constant attention to spinning blades, water flow, and electrical power; wear proper PPE, secure electrical connections, keep hands clear of the blade, and manage water carefully to prevent injuries.
Read the full guide: Tile Saw Safety Tips: How to Use a Wet Tile Saw Safely

Set the wet saw on a stable, flat surface near power and water, fill the reservoir and check the blade guard. Make practice cuts on scrap tile first, pushing the tile through slowly so the water cools the diamond blade.
Read the full guide: How to Use a Tile Saw: Beginner's Guide

How do I book it?

Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.

Reserve Now
ASPHALT & VINYL TILE CUTTER UP TO 12 SQ
Johnson City, TN ยท 1 available
$8/per day
Daily $8Weekly $24Monthly $60
Reserve Now
Scroll To Top