10in WET TILE SAW 31in CUT for rent in Hollywood, Florida
10in WET TILE SAW 31in CUT rents in Hollywood, Florida for $66 per half-day (4 hours), $97 per day or $388 per week. Pickup is in Hollywood, FL 33023. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $66 per half-day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Hollywood, FL
About this rental
The 10 inch wet tile saw with 31 inch cut features a 1.5 HP 110V motor, 2,800 RPM blade speed, 10-gallon water pan, and 3 GPM pump flow. Max cutting length is 31 inches with 90/45 degree depth, weighing 70 lbs including stand.
How much does it cost to rent a tile saw in Hollywood, FL?
10in WET TILE SAW 31in CUT rents for $66 per half-day (4 hours), $97 per day or $388 per week. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 4 days.
| Rental period | Price | Works out to |
|---|---|---|
| Half-day (4 hours) | $66 | About $16.50 per hour |
| Daily | $97 | $31 more than a half-day |
| Weekly | $388 | About $55 per day |
For comparison: Tile saw rentals typically cost $42 to $80 per day or $126 to $210 per week, depending on blade size and power. Renting lets you avoid the $200+ purchase price if you only need it for one project.
Read the full guide: Tile Saw Rental Cost: Daily & Weekly Rates
What is a tile saw good for?
A wet tile saw makes clean, straight cuts in tile and stone.
- Straight cuts in ceramic and porcelain tile
- Cutting stone and pavers
- Notches and angled cuts
- Cutting concrete slabs: a concrete saw
- Breaking out an old tile floor: a jackhammer, $36 per half-day
Use a manual tile cutter for simple straight cuts on ceramic, or rent a wet tile saw for porcelain, stone, curves, and notches that need precision edges.
Read the full guide: Tile Saw vs Tile Cutter: Which One Do You Need?
What are typical specs for 10 in wet tile saws?
These are the usual figures for 10 in wet tile saws, not this unit's own: each is the range across 4 published sources.
| Blade diameter | 10 in |
| Rip capacity | 24 to 28.4 in |
| Motor power | 1.5 hp |
| Depth of cut | 2.75 to 3.07 in |
Based on: DEWALT D24000S, MK Diamond MK-101-24, Husqvarna TS 60, Husqvarna TS 70
What size tile saw do I actually need for my project?
Choose a 7-inch saw for small ceramic tiles in bathrooms and kitchens, or a 10-inch wet saw if you're cutting larger porcelain tiles over 18 inches. Matching your saw size to your tile dimensions prevents cracked material and wasted time on your project.
Read the full guide: What Size Tile Saw Do I Need? Sizing Guide & Rental Tips
Where do I pick it up?
Pickup is in Hollywood, Florida 33023, Monday to Friday 7:00 am to 5:00 pm and Saturday 8:00 am to 3:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a tile saw?
Wet tile saws require constant attention to spinning blades, water flow, and electrical power; wear proper PPE, secure electrical connections, keep hands clear of the blade, and manage water carefully to prevent injuries.
Read the full guide: Tile Saw Safety Tips: How to Use a Wet Tile Saw Safely
Set the wet saw on a stable, flat surface near power and water, fill the reservoir and check the blade guard. Make practice cuts on scrap tile first, pushing the tile through slowly so the water cools the diamond blade.
Read the full guide: How to Use a Tile Saw: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now
