Vibratory Rammer BS50-4S ( Wacker ) for rent in Hollywood, Florida
Vibratory Rammer BS50-4S ( Wacker ) is a plate compactor that rents in Hollywood, Florida for $61 per half-day (4 hours), $82 per day or $326 per week. Pickup is in Hollywood, FL 33023. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $61 per half-day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Hollywood, FL
About this rental
Drive materials down firmly with a Wacker BS50-4S vibratory rammer built for soil compaction in tight areas. Reliable and powerful it's ideal for trench work and construction sites requiring strong targeted compaction.
How much does it cost to rent a plate compactor in Hollywood, FL?
Vibratory Rammer BS50-4S ( Wacker ) rents for $61 per half-day (4 hours), $82 per day or $326 per week. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 3 days.
| Rental period | Price | Works out to |
|---|---|---|
| Half-day (4 hours) | $61 | About $15.25 per hour |
| Daily | $82 | $21 more than a half-day |
| Weekly | $326 | About $47 per day |
What is a plate compactor good for?
A plate compactor or tamper packs soil, gravel and sand into a firm base before anything is built on it.
- Gravel bases for patios, pavers and walkways
- Packing backfill in trenches and around footings
- Firming a base before a slab or shed
- Mixing concrete for the pour: a concrete mixer
- Breaking up old concrete first: a jackhammer, $36 per half-day
A plate compactor at $65 to $100 per day suits gravel driveway bases under about 400 square feet, paver patios and tight spaces. A vibratory roller covers large open areas of soil or asphalt faster but costs $150 to $500 or more per day.
Read the full guide: Plate Compactor vs Roller: Which to Rent?
What are typical specs for jumping jack rammers?
These are the usual figures for jumping jack rammers, not this unit's own: each is the range across 3 published sources.
| Impact force | 3,060 to 3,597 lbf |
| Shoe size | 10.4 to 11 in |
| Operating weight | 130 to 146 lb |
Based on: Wacker Neuson BS50-2 (11 in shoe), Multiquip MTX60HD, Weber MT SRV 620-II
What size plate compactor do I need for my project?
Choose a plate compactor based on material and project type: lightweight handheld models work for pavers and gravel, while heavier reversible compactors suit base preparation and asphalt patching.
Read the full guide: What Size Plate Compactor Do I Need? Sizing Guide
Where do I pick it up?
Pickup is in Hollywood, Florida 33023, Monday to Friday 7:00 am to 5:00 pm and Saturday 8:00 am to 3:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a plate compactor?
Plate compactors require proper PPE like hearing protection and steel-toed boots, regular pre-operation inspections, and careful operation away from slopes and trenches to prevent injury from vibration, exhaust, and tip-over hazards.
Read the full guide: Plate Compactor Safety Requirements: PPE & Inspection Guide
Clear the area, add base material in layers no thicker than 4 inches, then walk the compactor slowly in straight, overlapping passes, two to three per section. Fill low spots and recompact until the surface feels firm.
Read the full guide: How to Use a Plate Compactor: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now
