Jumping Jack 3100LB for rent in Eatontown, New Jersey
Jumping Jack 3100LB is a plate compactor that rents in Eatontown, New Jersey for $94.60 per day, $354.20 per week or $664.40 per month. Pickup is in Eatontown, NJ 07724. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $94.60 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Eatontown, NJ
About this rental
Compact soil efficiently in trenches and tight spaces with the 3100LB jumping jack—ideal for backfill and small-area compaction.
How much does it cost to rent a plate compactor in Eatontown, NJ?
Jumping Jack 3100LB rents for $94.60 per day, $354.20 per week or $664.40 per month. A week costs about the same as 3.7 single days, so the weekly rate is the better price for any rental longer than 3 days.
| Rental period | Price | Works out to |
|---|---|---|
| Daily | $94.60 | |
| Weekly | $354.20 | About $51 per day |
| Monthly | $664.40 | About $22 per day |
What is a plate compactor good for?
A plate compactor or tamper packs soil, gravel and sand into a firm base before anything is built on it.
- Gravel bases for patios, pavers and walkways
- Packing backfill in trenches and around footings
- Firming a base before a slab or shed
- Mixing concrete for the pour: a concrete mixer, $50.60 per day
- Breaking up old concrete first: a jackhammer, $33 per day
Plate compactors work best for large, flat areas like driveways and patios, while jumping jack rammers are ideal for tight spaces and trench backfill. Choose based on your project size and the area you need to compact.
Read the full guide: Plate Compactor vs Jumping Jack Rammer: Which to Rent?
What are typical specs for jumping jack rammers?
These are the usual figures for jumping jack rammers, not this unit's own: each is the range across 3 published sources.
| Impact force | 3,060 to 3,597 lbf |
| Shoe size | 10.4 to 11 in |
Based on: Wacker Neuson BS50-2 (11 in shoe), Multiquip MTX60HD, Weber MT SRV 620-II
What size plate compactor do I need for my project?
Choose a plate compactor based on material and project type: lightweight handheld models work for pavers and gravel, while heavier reversible compactors suit base preparation and asphalt patching.
Read the full guide: What Size Plate Compactor Do I Need? Sizing Guide
Where do I pick it up?
Pickup is in Eatontown, New Jersey 07724, Monday to Friday 7:00 am to 5:30 pm and Saturday 8:00 am to 1:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a plate compactor?
Plate compactors require proper PPE like hearing protection and steel-toed boots, regular pre-operation inspections, and careful operation away from slopes and trenches to prevent injury from vibration, exhaust, and tip-over hazards.
Read the full guide: Plate Compactor Safety Requirements: PPE & Inspection Guide
A plate compactor is a powered machine that flattens and compresses soil, gravel, and asphalt for foundations and driveways. Operate it by filling the fuel tank, priming the engine, walking behind it in straight lines, and letting the machine's vibrations do the compacting work while you guide it forward.
Read the full guide: How to Use a Plate Compactor: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now
