18 Bobcat Auger for rent in Mount Airy, North Carolina
18 Bobcat Auger rents in Mount Airy, North Carolina for $65 per day or $190 per week. Pickup is in Mount Airy, NC 27030. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $65 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Mount Airy, NC

About this rental
18 Bobcat Auger Bit
This 18-inch auger bit delivers reliable performance for larger hole drilling in construction and landscaping projects.
How much does it cost to rent an auger in Mount Airy, NC?
18 Bobcat Auger rents for $65 per day or $190 per week. A week costs about the same as 2.9 single days, so the weekly rate is the better price for any rental longer than 2 days.
| Rental period | Price | Works out to |
|---|---|---|
| Daily | $65 | |
| Weekly | $190 | About $27 per day |
For comparison: Auger rentals typically cost $75 to $350 per day depending on the machine size and type, with options to compare daily and weekly rates from local providers.
Read the full guide: Auger Rental Cost: Daily & Weekly Rates
What is an auger good for?
A power auger drills clean, round holes for posts and footings.
- Fence and deck post holes
- Planting trees and shrubs
- Footings for mailboxes and signs
- Trenches for pipe or cable: a trencher, $65 per half-day
- Large or deep excavation: a mini excavator, $125 per day
Handheld augers work best for small projects with few holes in softer soil, while skid steer augers handle larger jobs and tougher ground but need more space. Choose based on hole count, soil hardness, and available workspace.
Read the full guide: Handheld vs Skid Steer Auger: Which Should You Rent?
What are typical specs for skid steer auger drives?
These are the usual figures for skid steer auger drives, not this unit's own: each is the range across 6 published sources.
| Maximum auger diameter | 19.7 to 36 in |
| Output torque | 1,282 to 3,285 ft-lb |
| Hydraulic flow range | 13.2 to 30 gpm |
Based on: Blue Diamond Extreme Duty Series 2 EX2, Blue Diamond Extreme Duty Series 2 EX4, Digga PDX, Digga PD4, Premier Attachments H015PD, Premier Attachments H019PD
How deep can an auger dig for fence posts and other projects?
Most one-person augers dig 3–4 feet deep with a standard bit, while extensions can reach 6–8 feet; tractor-mounted models go deeper depending on your project needs and soil type.
Read the full guide: How Deep Can an Auger Dig? Auger Depth Guide
Where do I pick it up?
Pickup is in Mount Airy, North Carolina 27030, Monday to Friday 7:30 am to 5:00 pm and Saturday 8:00 am to 12:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using an auger?
Auger operators must wear proper PPE, conduct pre-use inspections, locate underground utilities before digging, and follow safe operating procedures to prevent entanglement and utility strikes.
Read the full guide: Auger Safety Requirements: PPE, Inspections & Operation
Augers drill holes for fence posts, tree planting, deck footings, utility lines, and other landscaping and construction tasks. Renting one by the day or week lets you access the right tool for your project without buying equipment you'll rarely use.
Read the full guide: What Can an Auger Be Used For? Common Uses Explained
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now