Augerdingo - 2 1/2 Drive for rent in Mount Airy, North Carolina
Augerdingo - 2 1/2 Drive rents in Mount Airy, North Carolina for $50 per half-day (4 hours), $50 per day or $150 per week. Pickup is in Mount Airy, NC 27030. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $50 per half-day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Mount Airy, NC


About this rental
Dingo Auger – 2-1/2 Drive
Compatible with standard Bobcat auger bits, this Dingo auger drive delivers efficient digging performance for compact equipment.
How much does it cost to rent an auger in Mount Airy, NC?
Augerdingo - 2 1/2 Drive rents for $50 per half-day (4 hours), $50 per day or $150 per week. A week costs about the same as 3 single days, so the weekly rate is the better price for any rental longer than 3 days.
| Rental period | Price | Works out to |
|---|---|---|
| Half-day (4 hours) | $50 | About $12.50 per hour |
| Daily | $50 | |
| Weekly | $150 | About $21 per day |
For comparison: Auger rentals typically cost $75 to $350 per day depending on the machine size and type, with options to compare daily and weekly rates from local providers.
Read the full guide: Auger Rental Cost: Daily & Weekly Rates
What is an auger good for?
A power auger drills clean, round holes for posts and footings.
- Fence and deck post holes
- Planting trees and shrubs
- Footings for mailboxes and signs
- Trenches for pipe or cable: a trencher, $65 per half-day
- Large or deep excavation: a mini excavator, $125 per day
For five or more post holes, renting beats hand digging: a one-man gas auger rents for $60 to $90 a day and digs a hole in 2 to 5 minutes, versus 15 to 30 minutes or more by hand.
Read the full guide: Rent an Auger: Costs, Types & When It's Worth It
What are typical specs for mini track loader auger drives?
These are the usual figures for mini track loader auger drives, not this unit's own: each is the range across 5 published sources.
| Maximum auger diameter | 24 to 30 in |
| Output torque | 1,467 to 2,254 ft-lb |
| Hydraulic flow range | 11 to 20 gpm |
Based on: Blue Diamond Mini Auger Drive Extreme Duty Series 2 EX1, Blue Diamond Mini Auger Drive Extreme Duty Series 2 EX2, Premier Attachments MS11PD, Premier Attachments MS14PD, Digga Mini Auger Drive
What size auger do I need for my fence posts and deck?
Use a 6-8 inch auger for fence posts, 8-12 inches for deck footings, and 12-18 inches for trees, depending on soil type and how deep you need to dig. The right size prevents wobbling structures and ensures proper installation without multiple trips.
Read the full guide: What Size Auger Do I Need? Auger Size Guide
Where do I pick it up?
Pickup is in Mount Airy, North Carolina 27030, Monday to Friday 7:30 am to 5:00 pm and Saturday 8:00 am to 12:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using an auger?
Auger operators must wear proper PPE, conduct pre-use inspections, locate underground utilities before digging, and follow safe operating procedures to prevent entanglement and utility strikes.
Read the full guide: Auger Safety Requirements: PPE, Inspections & Operation
Augers drill holes for fence posts, tree planting, deck footings, utility lines, and other landscaping and construction tasks. Renting one by the day or week lets you access the right tool for your project without buying equipment you'll rarely use.
Read the full guide: What Can an Auger Be Used For? Common Uses Explained
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now