2018 Skytrak 8042 for rent in Bristol, Pennsylvania
2018 Skytrak 8042 is a telehandler that rents in Bristol, Pennsylvania for $575 per day, $1,400 per week or $2,700 per month. Pickup is in Bristol, PA 19007. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $575 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Bristol, PA
About this rental
The 2018 SkyTrak 8042 telehandler delivers dependable performance and excellent maneuverability for a wide variety of jobsite applications. Renting this model provides strong lift capability and intuitive controls.
Ideal for material placement and construction support, the 8042's rugged design and reliable drivetrain make it a consistent rental favorite for contractors who need efficiency and durability.
Available for Purchase @ $69875
How much does it cost to rent a telehandler in Bristol, PA?
2018 Skytrak 8042 rents for $575 per day, $1,400 per week or $2,700 per month. A week costs about the same as 2.4 single days, so the weekly rate is the better price for any rental longer than 2 days.
| Rental period | Price | Works out to |
|---|---|---|
| Daily | $575 | |
| Weekly | $1,400 | About $200 per day |
| Monthly | $2,700 | About $90 per day |
For comparison: Telehandler rentals typically cost $350 to $1,100 per day depending on size and capacity, making them an affordable alternative to the $80,000+ purchase price. Rates vary by location and equipment specs, so comparing local providers helps you find the best deal for your project timeline.
Read the full guide: Telehandler Rental Cost: Daily & Weekly Rates
What is a telehandler good for?
A telehandler is a rough-terrain forklift with a telescoping boom that lifts loads high and reaches out over obstacles.
- Setting trusses, lumber and roofing on a job site
- Unloading pallets on rough or muddy ground
- Placing loads on upper floors and roofs
- Moving pallets on a smooth warehouse floor: a forklift
- Lifting people to work at height: a boom lift
Forklifts work best on flat indoor surfaces, while telehandlers handle rough terrain and reach higher elevations outdoors. Choose based on your work environment and lifting needs.
Read the full guide: Telehandler vs Forklift: Differences and Rental Guide
What are typical specs for 8,000 lb, 42 to 44 ft telehandlers?
These are the usual figures for 8,000 lb, 42 to 44 ft telehandlers, not this unit's own: each is the range across 3 published sources.
| Maximum lift capacity | 8,000 lb |
| Maximum lift height | 41.9 to 43.8 ft |
| Maximum forward reach | 26.6 to 28.3 ft |
Based on: JLG 8042, Genie GTH-844, Gehl RS8-42 GEN:3
Where do I pick it up?
Pickup is in Bristol, Pennsylvania 19007, Monday to Thursday 7:00 am to 3:30 pm and Friday 7:00 am to 3:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a telehandler?
Inspect the machine, deploy stabilizers on firm level ground and fasten your seatbelt before starting. Carry loads low with the boom retracted, check the load chart for capacity, and use a spotter when placing loads at height.
Read the full guide: How to Use a Telehandler: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now
