Vibrating Plate Compactor - Standard for rent in York, Pennsylvania
Vibrating Plate Compactor - Standard rents in York, Pennsylvania for $62 per half-day (4 hours) or $89 per day. Pickup is in York, PA 17402. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $62 per half-day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in York, PA

About this rental
Vibrating Plate Compactor - Standard Rental
The standard vibrating plate compactor rental provides efficient soil and surface compaction. Perfect for general construction use.
How much does it cost to rent a plate compactor in York, PA?
Vibrating Plate Compactor - Standard rents for $62 per half-day (4 hours) or $89 per day. On top of the rate, the lister charges a 10% damage waiver at checkout.
| Rental period | Price | Works out to |
|---|---|---|
| Half-day (4 hours) | $62 | About $15.50 per hour |
| Daily | $89 | $27 more than a half-day |
What is a plate compactor good for?
A plate compactor or tamper packs soil, gravel and sand into a firm base before anything is built on it.
- Gravel bases for patios, pavers and walkways
- Packing backfill in trenches and around footings
- Firming a base before a slab or shed
- Mixing concrete for the pour: a concrete mixer
- Breaking up old concrete first: a jackhammer
A plate compactor vibrates granular material like sand and gravel and suits driveways, patios and paver bases. A jumping jack rammer pounds cohesive soils like clay and fits narrow trenches, backfill and footings.
Read the full guide: Plate Compactor vs Jumping Jack Rammer: Which to Rent?
What are typical specs for rental forward plate compactors?
This listing doesn't state a size, so these are the usual figures across the forward plate compactors rental stores stock, not this unit's own: each is the range across 3 published sources.
| Centrifugal force | 3,372 to 4,496 lbf |
| Plate width | 19.7 in |
| Operating weight | 207 lb |
Based on: Wacker Neuson WP1550A, Multiquip MVC88VTH, Weber MT CF 3-II Hd
What size plate compactor do I need for my project?
Choose a plate compactor based on material and project type: lightweight handheld models work for pavers and gravel, while heavier reversible compactors suit base preparation and asphalt patching.
Read the full guide: What Size Plate Compactor Do I Need? Sizing Guide
Where do I pick it up?
Pickup is in York, Pennsylvania 17402, Monday to Friday 8:00 am to 5:00 pm and Saturday 8:00 am to 2:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a plate compactor?
Plate compactors require proper PPE like hearing protection and steel-toed boots, regular pre-operation inspections, and careful operation away from slopes and trenches to prevent injury from vibration, exhaust, and tip-over hazards.
Read the full guide: Plate Compactor Safety Requirements: PPE & Inspection Guide
Clear the area, add base material in layers no thicker than 4 inches, then walk the compactor slowly in straight, overlapping passes, two to three per section. Fill low spots and recompact until the surface feels firm.
Read the full guide: How to Use a Plate Compactor: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now