60# Breaker / Jack Hammer - Air for rent in Pawtucket, Rhode Island
60# Breaker / Jack Hammer - Air is a jackhammer that rents in Pawtucket, Rhode Island for $50 per day. Pickup is in Pawtucket, RI 02860. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $50 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick up or deliveryFrom the owner in Pawtucket, RI

About this rental
Rent a powerful 60 lb air breaker jack hammer designed for heavy-duty concrete demolition, asphalt removal, trenching, and construction site breaking applications with dependable pneumatic performance.
How much does it cost to rent a jackhammer in Pawtucket, RI?
60# Breaker / Jack Hammer - Air rents for $50 per day. On top of the rate, the lister charges a 12% damage waiver at checkout.
For comparison: Jackhammer rentals typically cost $50 to $180 per day, with electric models cheaper and gas-powered breakers more expensive, while weekly rates offer 30 to 40 percent savings.
Read the full guide: Jackhammer Rental Cost: Daily, Weekend & Weekly Rates
What is a jackhammer good for?
A jackhammer breaks up concrete, asphalt and hard ground.
- Removing slabs, sidewalks and steps
- Breaking out footings
- Breaking up asphalt and compacted ground
- Cutting a clean line in concrete: a concrete saw
- Smoothing or leveling a concrete surface: a concrete grinder
Electric jackhammers work best for smaller jobs and indoor spaces, while pneumatic models offer more power for heavy-duty demolition but require an air compressor. Choose electric for convenience and lower cost, or pneumatic if you need sustained power on large concrete projects.
Read the full guide: Electric vs Pneumatic Jackhammer: Which Is Right?
What are typical specs for 60 lb pneumatic jackhammers?
These are the usual figures for 60 lb pneumatic jackhammers, not this unit's own: each is the range across 3 published sources.
| Blows per minute | 1,250 to 1,500 bpm |
| Air consumption | 63 to 76.3 cfm |
Based on: Chicago Pneumatic CP-1230, Ingersoll Rand MX60A, Atlas Copco TEX P60S
What size jackhammer do I need for my concrete job?
Choose a jackhammer based on concrete thickness and whether rebar is present. Light models work for thin concrete, while heavier pneumatic models tackle thick reinforced concrete faster, though they cost more and require greater control.
Read the full guide: What Size Jackhammer Do I Need? Sizing Guide
Where do I pick it up?
Pickup is in Pawtucket, Rhode Island 02860, Monday to Saturday 8:00 am to 5:00 pm. You get the exact address at checkout. Return it to a separate drop-off address, given at checkout. This lister offers pickup and delivery.
What should I know before using a jackhammer?
Wear a face shield over safety glasses, hearing protection, anti-vibration gloves, steel-toe boots and a respirator when dry-cutting. Inspect the bit and cord or hoses first, and keep trigger time to 2 to 4 hours per shift.
Read the full guide: Jackhammer Safety Requirements: PPE & Inspection Guide
Jackhammer rentals cost significantly less than buying and are available in multiple sizes for breaking concrete and demolition work. Before renting, consider the job scope, duration needed, and machine type to find the right fit for your project.
Read the full guide: Renting a Jackhammer: Complete Rental Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now