Micro Excavator - Yanmar SV08 for rent in Pawtucket, Rhode Island
Micro Excavator - Yanmar SV08 is a mini excavator that rents in Pawtucket, Rhode Island for $325 per day. Pickup is in Pawtucket, RI 02860. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $325 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick up or deliveryFrom the owner in Pawtucket, RI

About this rental
Compact Yanmar SV08 micro excavator rental ideal for tight-access excavation, indoor demolition, utility trenching, landscaping, and residential construction projects.
How much does it cost to rent a mini excavator in Pawtucket, RI?
Micro Excavator - Yanmar SV08 rents for $325 per day. On top of the rate, the lister charges a 12% damage waiver at checkout.
For comparison: Mini excavator rentals cost $200 to $600 per day depending on machine size and location. Weekly rates, deposits, and included features vary by provider.
Read the full guide: Mini Excavator Rental Cost
What is a mini excavator good for?
A mini excavator rotates 360 degrees and is built for digging deep holes and trenches where space is tight. It is the wrong tool for moving material across a site.
- Foundation and footing excavation
- French drains and yard drainage lines
- Septic excavation and drain-field trenching
- Deep holes in tight spaces
- Moving material and grading: a skid steer, $325 per day
- Narrow irrigation or utility lines: a trencher
- Fence and deck post holes: an auger, $91 per day
Skid loaders are faster for moving materials and grading, while mini excavators dig deeper and handle tight spaces better. Choose based on whether your project needs speed and maneuverability (skid loader) or precision digging and reach (mini excavator).
Read the full guide: Skid Loader vs Mini Excavator: Which Should You Rent?
What are typical specs for 1 ton micro excavators?
These are the usual figures for 1 ton micro excavators, not this unit's own: each is the range across 3 published sources.
| Operating weight | 2,370 to 2,593 lb |
| Maximum digging depth | 5 ft 11 in to 6 ft |
| Engine power | 10.2 to 11.7 hp |
| Overall width | 28 to 34 in |
Based on: Bobcat E10, Takeuchi TB210R, Kubota K008-5
What size trailer do I need for a 1 ton micro excavator?
1 ton micro excavators typically weigh 2,370 to 2,593 lb; this listing doesn't give the unit's own weight. That is more than a single-axle 5 x 8 ft utility trailer carries (2,332 to 2,340 lb). A tandem-axle utility trailer in the 7,000 lb GVWR class typically carries 5,065 to 5,350 lb, which covers it. Your tow vehicle has to be rated for the machine and the trailer together: about 4,020 to 4,793 lb with a trailer that size. This lister also offers delivery, which saves the haul.
Trailer capacities are the typical range for that class of trailer; go by the rating plate on the one you use.
Will a 1 ton micro excavator fit through a gate?
1 ton micro excavators are typically 28 to 34 in wide. That clears a standard 36 in gate.
How deep can a mini excavator dig?
Mini excavators can dig between 6 feet on 1-ton machines and 13+ feet on 6-8 ton models, with depth depending on the machine's weight class, boom configuration, and bucket size.
Read the full guide: How Deep Can a Mini Excavator Dig? Depth by Size
Where do I pick it up?
Pickup is in Pawtucket, Rhode Island 02860, Monday to Saturday 8:00 am to 5:00 pm. You get the exact address at checkout. Return it to a separate drop-off address, given at checkout. This lister offers pickup and delivery.
Pick a trailer whose payload, meaning GVWR minus the trailer's own weight, is at least 20 percent above the excavator's operating weight. That usually means 12,000 to 14,000 lb GVWR for a 3 to 4-ton machine, 16,000 to 22,000 lb for 5 to 6 tons, and a gooseneck above 7 tons. Confirm the actual ratings with the provider.
Read the full guide: What Size Trailer Do I Need for a Mini Excavator?
What should I know before using a mini excavator?
Do a pre-operation check, confirm whether the controls use the SAE or ISO pattern, and practice at low RPM. Call 811 before digging, keep the bucket low when traveling, and stay at least two feet from trench edges.
Read the full guide: Mini Excavator Safety Tips for Beginners
Call 811 before digging, check fluids and controls, then practice boom, bucket and travel movements in an open area for 10 to 15 minutes. Most beginners feel comfortable within 30 to 60 minutes and should dig in small, controlled passes.
Read the full guide: How to Use a Mini Excavator: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now