TRENCHER - 4inX24in TRACKED BARRETO for rent in Edmonds, Washington
TRENCHER - 4inX24in TRACKED BARRETO rents in Edmonds, Washington for $225 per day or $900 per week. Pickup is in Edmonds, WA 98026. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $225 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Edmonds, WA
About this rental
DIMENSIONS Weight: 1,085 lbs. Height: 52.5 Length: 84 Width: 33.25 Track Width: 7.12 Total Ground Contact: 262 sq. in. Hydraulic Reservoir: 7.3 gallons Ground Drive Forward: 210 ft/min Ground Drive Reverse: 100 ft/min Engine: Honda 11.7 HP GX390 Click [here][1] for an operation and safety video. [1]: https://www.youtube.com/watch?v=EuicOtPRISI&t=2s
How much does it cost to rent a trencher in Edmonds, WA?
TRENCHER - 4inX24in TRACKED BARRETO rents for $225 per day or $900 per week. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 4 days.
| Rental period | Price | Works out to |
|---|---|---|
| Daily | $225 | |
| Weekly | $900 | About $129 per day |
For comparison: Trencher rental costs $150 to $600 per day depending on machine size and location, with weekly and monthly options available at lower daily rates.
Read the full guide: Trencher Rental Cost: Daily & Weekly Rates
What is a trencher good for?
A trencher cuts a narrow, even channel for irrigation, drainage and utility lines far faster than digging by hand.
- Irrigation and sprinkler lines
- Drainage lines and french drains
- Electrical, water and cable runs
- Wide or deep excavation: a mini excavator
- Post holes: an auger, $10 per day
Walk-behind trenchers work well for most residential jobs and cost less, while ride-on trenchers handle longer runs, harder soil, and larger commercial projects more efficiently. Choose based on your project size, soil conditions, and trench length.
Read the full guide: Walk-Behind vs Ride-On Trencher: Which Is Right for You?
How deep can a trencher dig?
Trencher depth ranges from 12 inches for walk-behind models to 6 feet or more for ride-on units, depending on your project's utility lines, drainage, or irrigation needs.
Read the full guide: How Deep Can a Trencher Dig? Depth Guide & Rentals
Where do I pick it up?
Pickup is in Edmonds, Washington 98026, Monday to Friday 7:00 am to 5:00 pm, Saturday 8:00 am to 5:00 pm and Sunday 9:00 am to 4:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a trencher?
Trencher operators must follow OSHA safety standards, maintain proper clearances from underground utilities, and never operate the machine alone or without proper training and protective equipment. Key hazards include cave-ins, kickback, and contact with buried lines—all preventable through pre-operation inspections and adherence to established safe work practices.
Read the full guide: Trencher Safety Requirements: What Operators Must Know
A trencher digs narrow channels in soil for irrigation, drainage, and utility lines. Rent the right size machine, set it up properly, operate it safely by following the manufacturer's instructions, and maintain consistent depth and speed throughout your project.
Read the full guide: How to Use a Trencher: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed.
Reserve NowMore Rentals
