Stump Grinder - SC40TX Track Vermeer for rent in Edmonds, Washington
Stump Grinder - SC40TX Track Vermeer rents in Edmonds, Washington for $375 per day, $1,500 per week or $3,750 per month. Pickup is in Edmonds, WA 98026. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $375 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Edmonds, WA
About this rental
SC40TX STUMP CUTTER DIESEL POWERED GENERAL Length: 130" (330.2 cm) Width: 35.5" (90.2 cm) Height: 56.5" (143.5 cm) Weight: 2950 lb (1338.1 kg) Type: Track self-propelled Ground speed: Low range 0-177 ft/min (0-54 m/min); high range 0-295 ft/min (0-90 m/min) Ground pressure: 5.2 psi (35.9 kPa) 40HP DIESEL ENGINE CAPACITIES/ELECTRICAL DIESEL fuel tank: 14.5 gal (54.9 L) Hydraulic tank: 19 gal (71.9 L) Pump flow at max rpm: 24.5 gpm (92.7 L/min) Electrical system: 12-Volt. Group 31 950 CCA battery CUTTING DIMENSIONS Cutter wheel straight line dimension: 50" (127 cm) Cutter wheel cut above ground: 24" (61 cm) Cutter wheel cut below ground: 16" (40.6 cm) CUTTER WHEEL Cutter wheel diameter (without teeth): 18 (45.7 cm) Cutter wheel thickness: .5 (1.3 cm) with Pow-R plates Tooth style: Yellow Jacket cutter system Number of teeth: 20 Cutter wheel drive type: Hydraulic motor directly mounted to a 90 degree gear box Chip containment: 3 cu ft (.1 cu m) Flow control system: SmartSweep control system
How much does it cost to rent a stump grinder in Edmonds, WA?
Stump Grinder - SC40TX Track Vermeer rents for $375 per day, $1,500 per week or $3,750 per month. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 4 days.
| Rental period | Price | Works out to |
|---|---|---|
| Daily | $375 | |
| Weekly | $1,500 | About $214 per day |
| Monthly | $3,750 | About $125 per day |
For comparison: Stump grinder rentals typically cost $100 to $300 per day depending on machine size, making them significantly cheaper than hiring a professional tree service. Rates vary by location and rental length, with weekly options available to reduce daily costs.
Read the full guide: Stump Grinder Rental Cost: Daily & Weekly Rates
What is a stump grinder good for?
A stump grinder chews a stump down below ground level so the area can be replanted or sodded.
- Removing stumps after a tree comes down
- Grinding surface roots
- Clearing stumps before sod or landscaping
- Chipping branches and brush: a wood chipper
- Cutting up the trunk: a chainsaw
- Digging out a whole root ball: a mini excavator
Walk-behind grinders cost less and work well for small stumps on flat ground, while self-propelled models handle larger stumps and tough terrain but cost more. Choose based on stump size, how many you're removing, and your property's terrain.
Read the full guide: Walk-Behind vs Self-Propelled Stump Grinder Guide
What are the specs of the Vermeer SC40TX?
| Engine | 40 hp Kohler KDI1903TCR diesel |
| Cutting depth | 16 in below grade |
| Cutting height | 24 in above grade |
| Cutter wheel | 18 in (without teeth) |
| Weight | 2,950 lb |
| Machine width | 35.5 in (tracks retracted) |
These are the manufacturer's figures for the model; the unit you rent may differ by configuration. Source: Vermeer SC40TX page (RDO Equipment, Vermeer dealer)
What size trailer do I need for the Vermeer SC40TX?
The Vermeer SC40TX weighs 2,950 lb. That is more than a single-axle 5 x 8 ft utility trailer carries (2,332 to 2,340 lb). A tandem-axle utility trailer in the 7,000 lb GVWR class typically carries 5,065 to 5,350 lb, which covers it. Your tow vehicle has to be rated for the machine and the trailer together: about 4,600 to 5,150 lb with a trailer that size.
Trailer capacities are the typical range for that class of trailer; go by the rating plate on the one you use.
Will the Vermeer SC40TX fit through a gate?
The Vermeer SC40TX is 35.5 in wide. That leaves little or no clearance in a standard 36 in gate; measure the opening before you book.
What size stump grinder do I need for my job?
Choose a stump grinder based on stump diameter, soil conditions, access space, and how many stumps you're removing. Renting the right size prevents wasted time and ensures efficient completion.
Read the full guide: What Size Stump Grinder Do I Need?
Where do I pick it up?
Pickup is in Edmonds, Washington 98026, Monday to Friday 7:00 am to 5:00 pm, Saturday 8:00 am to 5:00 pm and Sunday 9:00 am to 4:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using a stump grinder?
Stump grinding requires eye and hearing protection, steel-toed boots, heavy gloves, and long pants to protect against wood chips and debris ejected at high speeds. Proper PPE compliance with OSHA guidelines is essential before operating this hazardous equipment.
Read the full guide: Stump Grinder PPE Requirements: Safety Gear Guide
A stump grinder uses a rotating cutting wheel to pulverize tree stumps below ground level; you can rent one and operate it yourself by positioning the grinder over the stump, slowly lowering the wheel, and moving it side to side until the stump is reduced to sawdust.
Read the full guide: How to Use a Stump Grinder: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed.
Reserve NowMore Rentals
