Compressor - 8 CFM Gas for rent in Hollywood, Florida
Compressor - 8 CFM Gas is an air compressor that rents in Hollywood, Florida for $42 per half-day (4 hours), $52 per day or $208 per week. Pickup is in Hollywood, FL 33023. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.
- Step 1Pick your datesFrom $42 per half-day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick it upFrom the owner in Hollywood, FL
About this rental
Power multiple tools with an 8 CFM gas air compressor that delivers reliable output for construction automotive and industrial applications. Its portable design provides flexibility for outdoor projects.
How much does it cost to rent an air compressor in Hollywood, FL?
Compressor - 8 CFM Gas rents for $42 per half-day (4 hours), $52 per day or $208 per week. A week costs about the same as 4 single days, so the weekly rate is the better price for any rental longer than 4 days.
| Rental period | Price | Works out to |
|---|---|---|
| Half-day (4 hours) | $42 | About $10.50 per hour |
| Daily | $52 | $10 more than a half-day |
| Weekly | $208 | About $30 per day |
What is an air compressor good for?
An air compressor powers pneumatic tools.
- Running nailers, staplers and impact tools
- Powering pneumatic jackhammers with a towable unit
- Blowing out lines and inflating tires
- Breaking concrete without an air supply: a jackhammer, $36 per half-day
- Electrical power on site: a generator, $128 per day
Pancake compressors are more stable and portable for light jobs, while hot dog models offer higher CFM output for demanding tools, so choose based on your power needs and workspace.
Read the full guide: Pancake vs Hot Dog Air Compressor: Rental Guide
What are typical specs for 8 to 18 CFM gas job-site air compressors?
These are the usual figures for 8 to 18 CFM gas job-site air compressors, not this unit's own: each is the range across 3 published sources.
| Maximum pressure | 145 to 150 psi |
| Weight | 158 to 175 lb |
Based on: Metabo HPT EC2610E, Mi-T-M AM1-PH65-08M, DeWalt DXCMTB5590856
How do I transport an 8 to 18 CFM gas job-site air compressor?
8 to 18 CFM gas job-site air compressors typically weigh 158 to 175 lb; this listing doesn't give the unit's own weight. Plan on two people to lift it into a truck bed, van or SUV.
What size air compressor do I need for my tools?
Size the compressor to your biggest tool's CFM at its rated PSI, plus a 20 to 30 percent buffer. Nail guns need 0.5 to 2.5 CFM from a small pancake unit, while impact wrenches need 4 to 8 CFM and HVLP sprayers 4 to 12 CFM.
Read the full guide: What Size Air Compressor Do I Need?
Where do I pick it up?
Pickup is in Hollywood, Florida 33023, Monday to Friday 7:00 am to 5:00 pm and Saturday 8:00 am to 3:00 pm. You get the exact address at checkout. Return it to the same address. This lister offers pickup.
What should I know before using an air compressor?
Inspect the tank, pressure relief valve and hoses before each use, wear eye and hearing protection, and never point a nozzle at anyone. OSHA requires compressed air used for cleaning to be reduced below 30 PSI.
Read the full guide: Air Compressor Safety Tips: OSHA Rules & Rental Guide
Choose an air compressor sized for your tools, connect it to a power source, attach your tool to the hose, and adjust the pressure settings before operating. Always wear safety gear and drain the tank after each use.
Read the full guide: How to Use an Air Compressor: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now
