26' Electric Scissor Lift - Indoor - LGMG S2632E for rent in Pawtucket, Rhode Island
26' Electric Scissor Lift - Indoor - LGMG S2632E rents in Pawtucket, Rhode Island for $265 per day. Pickup is in Pawtucket, RI 02860. Reserve and pay online through RNTR.
New to RNTR?
RNTR is a rental marketplace. Local owners list their equipment and gear; you reserve and pay online, then get it from them.

- Step 1Pick your datesFrom $265 per day
- Step 2Lister approves your requestThe owner confirms your dates
- Step 3Pay securelyCard checkout, secured by Stripe
- Step 4Pick up or deliveryFrom the owner in Pawtucket, RI

About this rental
26-foot electric indoor scissor lift rental featuring the LGMG S2632E platform for maintenance work, facility access, electrical installation, and indoor elevated applications.
How much does it cost to rent a scissor lift in Pawtucket, RI?
26' Electric Scissor Lift - Indoor - LGMG S2632E rents for $265 per day. On top of the rate, the lister charges a 12% damage waiver at checkout.
For comparison: Scissor lift rentals typically cost $150 to $650 per day depending on the lift height, type, and your location. Pricing varies by local supplier, so comparing rates before booking can help you find the best deal.
Read the full guide: Scissor Lift Rental Cost: Daily & Weekly Rates
What is a scissor lift good for?
A scissor lift raises a wide platform straight up for work on flat, firm surfaces.
- Indoor ceiling, lighting and electrical work
- Painting and drywall at height
- Warehouse and maintenance tasks
- Reaching up and over obstacles: a boom lift
- Lifting and placing loads: a telehandler
A scissor lift raises a platform straight up on flat, hard surfaces, while a boom lift also reaches out horizontally and works on rough or sloped ground. Booms rent for $250 to $1,500+ a day versus $150 to $450 for scissor lifts.
Read the full guide: Boom Lift vs. Scissor Lift Rental: Which Do You Need?
What are the specs of the JCB S2632E?
| Platform height | 26 ft |
| Working height | 32 ft |
| Platform capacity | 550 lb |
| Platform size | 89 in x 32 in |
| Machine weight | 4,806 lb |
| Power | Battery electric |
These are the manufacturer's figures for the model; the unit you rent may differ by configuration. Source: JCB S2632E product page
What size trailer do I need for the JCB S2632E?
The JCB S2632E weighs 4,806 lb. That is more than a single-axle 5 x 8 ft utility trailer carries (2,332 to 2,340 lb). A tandem-axle utility trailer in the 7,000 lb GVWR class typically carries 5,065 to 5,350 lb, which covers it. Your tow vehicle has to be rated for the machine and the trailer together: about 6,456 to 7,006 lb with a trailer that size. This lister also offers delivery, which saves the haul.
Trailer capacities are the typical range for that class of trailer; go by the rating plate on the one you use.
Where do I pick it up?
Pickup is in Pawtucket, Rhode Island 02860, Monday to Saturday 8:00 am to 5:00 pm. You get the exact address at checkout. Return it to a separate drop-off address, given at checkout. This lister offers pickup and delivery.
What should I know before using a scissor lift?
Inspect the lift, set it up on firm, level ground and clip a full-body harness to the anchor point inside the guardrail. Raise the platform slowly from the platform controls and drive only with the platform fully lowered.
Read the full guide: How to Use a Scissor Lift: Beginner's Guide
How do I book it?
Reserve online through the RNTR marketplace. Checkout, payment and scheduling all happen in the app, with no phone call needed. This lister requires a driver's license: at checkout you upload the front and back of yours and a selfie holding it, or use a verification saved from an earlier rental.
Reserve Now